Self priming pumps require initial priming to operate.
Thick aluminum die-cast impeller for dirty water applications.
Self-lubricating ceramic carbon mechanical seal provides rugged construction for long unit life.
Shims allow the clearance to be readjusted between the impeller and volute as the pump wears from dirt and grit. This saves the cost of replacing the major pump components.
Heavy duty aluminum die-cast volute.
Small, compact pump weighs just 12 pounds.
Standard accessories include; tool kit, hose coupling, strainer and hose band.
The PKV110 is powered by Subaru's 4-cycle 1.1hp EH025 Overhead Valve
Heavy-duty die-cast aluminum housing provides strong durability against damaging debris.
Foam air cleaner element keeps dirt and debris from entering the engine. Owner's manual shows correct procedure for cleaning and reinstalling.
Changing the pump's speed is easy with this large control speed lever. Moves smoothly and easy to grip.
Easily check oil level with the large twist out oil check dipstick.
Large fill hole allows easy pour and fill with standard fuel gas can.
Primer bulb for fast starting. Just push a few times to bring fuel up to carburetor.
Easy to see red choke lever for faster starting.
The four rubber isolation feet keep the pump from "walking" during operation.
Large O-ring seal for better suction. O-ring is seated against pump front housing and backing plate for a tight seal.
Easy spark plug access when maintenance is needed.